Alien Extreme Translucency Zirconia Block 98mm Disk PreShaded Blank – Alien Milling Technologies
Call 844-ZIRCONIA | Mon-Fri 8am-4:30pm PST
Cart 0
Alien Extreme Translucency 98mm Zirconia Blocks
Ask a Question

Alien™

Alien Extreme Translucency 98mm Zirconia Blocks

€157,95

We don't just make it, we mill it everyday!

Get unmatched support when you buy Alien Zirconia Blocks from a team of professionals who use these blanks on a daily basis. 

1,000 MPa at 49% Translucency Factor. 

Available in...

White Zirconia 98mm Puck 

  • 98 mm x 14 mm 
  • 98 mm x 20 mm 
  • 98 mm x 25 mm 

Pre-Shaded Zirconia 98mm Puck (White BL-1 BL-2 A1 A2 A3 A3.5 B1 B2 B3 C1 C2 C3 D2 D3)

  • 98 mm x 14 mm 
  • 98 mm x 20 mm 
  • 98 mm x 25 mm available only in White, BL1, BL2, A1, A2, A3, and B1

Alien Extreme on the Front Cover of LMT!

Alien CEO, Saro Hatzakortzian, holding the latest copy of the LMT Magazine, featuring the Alien Extreme on the front cover. In his other, he is hodling the most advanced zirconia known to mankind. 

Read More

Compatibility

98mm with a 10mm step. Compatible with Weiland, VHF, Roland, and most open CAD CAM Milling Machines. 

Isostatic Pressing

Each Zirconia Blank is isostaically pressed for consistent results every time. We do not cut corners, as we use the exact same zirconia for our milling services. 

Gentle on your Mill

Alien Zirconia Disks are softer in the green state, than generic zirconia. This extends the life of your spindle, and tools. 

Translucency Factor

Extreme Translucency at 49%

Research

We research, and use 98 mm Alien Zirconia Blanks in our milling center everyday. We know our zirconia is out of this world. Many labs, doctors, and patients may be unaware Zirconia is a radioactive material. Safety is the main focus of the company, and we would not use unsafe materials exposing our technicians to unsafe materials. 

Our Research and Development engineers continually test the zirconia powder for any traces of radioactivity, and makes sure the zirconia is 100% safe every time. 

Material Safety Data Sheet and IFU

 

Sintering Schedule

For more programs, including programs for certain ovens, visit the sintering page


Up to 45 Units 

Total Run Time: 12-13 Hours

1-45 units
Step  Start Temp C End Temp C Rate Climb / min Time (mins)
1 0 900 10 90
2 900 900 0 10
3 900 1540 3 214.00
4 1540 1540 0 150
5 1540 0 0 Natural Cooling

 


 

46 - 80 units 

Total Run Time: 16-17 Hours

46+ Units
Step  Start Temp C End Temp C Rate Climb / min Time (mins)
1 0 900 6 150
2 900 900 0 30
3 900 1540 3 214.00
4 1540 1540 0 270
5 1540 0 0 Natural Cooling



 

Warp Speed  5-15 units

(Fast Sintering) 
Up to 3 Unit bridges only


Total Run Time: 2-2.5 Hours

Fast Sintering
Step  Start Temp C End Temp C Rate Climb / min Time (mins)
1 0 1540 35 44
2 1540 1540 0 60
3 1540 300 45 28

 

**CAUTION - Please check with your sintering oven manufacture if the oven is capable. Fast Sintering cycles add stress on your oven, causing parts to wear and tear sooner. 


 

Full Arch Hybrid Sintering Program

Total Run Time: 23-25 hours 

Full Arch Hybrid Sintering Program
Step  Start Temp C End Temp C Rate Climb / min Time (mins)
1 0 900 6 150
2 900 900 Hold 30
3 900 1540 3 214.00
4 1540 1540 Hold 270
5 1540 1300 0
Natural Cooling 
6 1300 1300 Hold
120
7 1300 1200 0
Natural Cooling 
8 1200 1200 Hold 120
9 1200 1100 0 Natural Cooling
10 1100 1100 Hold 120
11 1100 1000 0 Natural Cooling 
12 1000 1000 Hold 120
13 1000 900 0 Natural Cooling 
14 900 900 Hold 60
15 900
0 0 Natural Cooling 

Customer Reviews

4.8 Based on 12 Reviews
5 ★
92% 
11
4 ★
0% 
0
3 ★
0% 
0
2 ★
8% 
1
1 ★
0% 
0
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • anterior
  • zirconium
  • company
  • owner
  • small business owner
  • puck
  • labor
  • unit
  • abutments
  • tooth
CB
CJ B.
United States United States
I recommend this product
06/15/2023

Still the most esthetic with all the strength

Always used in the anterior region with no worries about fracturing. Highly esthetic and is my highest volume zirconia since its introduction.

Alien Milling Technologies Alien Extreme Translucency 98mm Zirconia Blocks Review
CB
CJ B.
United States United States
I recommend this product
06/15/2023

Alien HT is perfect for dark stumps and full titanium abutments

I just started using this zirconia especially over full titanium custom abutments. It really blocks the dark values from the metal. It especially helps when it has to be an anterior lower or a #7 or #10 where the abutment is too small for a hybrid design. It keeps the tooth natural and healthy looking with a neutral value that matches the surrounding dentition. Great stuff.

MC
MARIO C.
United States United States
I recommend this product
06/01/2023

So far I love working with this Zirconium. Good aesthetics and excellent resistance

KK
krassimir k.
United States United States
I recommend this product
12/09/2022

great service

product is great.next day delivery and nice gift.thank you

CB
CJ B.
United States United States
I recommend this product
11/25/2022

Excellent optical properties and enduring strength

I use It in the posterior as well as the anterior. I can make it look layered and not worry about fracturing.

Alien Milling Technologies Alien Extreme Translucency 98mm Zirconia Blocks ReviewAlien Milling Technologies Alien Extreme Translucency 98mm Zirconia Blocks Review

Share this Product


Other great brands